There are four steps to complete your ordering:
Step 1: You need to send us information through our online quote form at http://www. SunreyTech.com or you can send the board data to sales@sunreytech.comsales@SunreyTech.com and ask for an offline quote.
Step 2: You will receive your quote instantly upon sending your online quote request. Or you will receive the quote in 24 hours if you send an offline quote request. Then, if you are happy with our quote, please send your PCB Gerber files to us. We encourage you to ask whatever questions you may before ordering.
Step 3: We will check your Gerber files to see if they match with the information on your quote request form and if the Gerber files are complete and acceptable for our manufacture processing. We may give you some suggestions if there are some problems.
Gerber files generated by PCB design software. 274X format is preferred. Other Gerber formats, such as 274D, may have compatibility problems with CAM's and we will not be responsible should there be problems generated by non-274X format.
Different PCB CAD software has different file extension definitions. The following Gerber files and drill files are just examples from Protel.
2-layer file extensions in Protel |
|
Examples of File |
Top Layer (Routing) Bottom Layer (Routing) Top Layer overlay Bottom Layer Overlay Top Solder Mask Bottom Solder Mask Drill drawing ( with defined drill sizes and locations) Read me file (include design and manufacturing guidelines or NC drill file if necessary)
|
|
.GTL .GBL .GTO .GBO .GTS .GBS .GDD, .DRR, DRD
.TXT
|
Depending your needs, you may also send |
|
|
Top Paste Mask Bottom Paste Mask Pad Master, Top Pad Master, Bottom Keep Out Layer Drill Guide |
|
.GTP .GBP .GPT .GPB .GKO .GDG |
For multiplayer PCB, in addition, you may send the following files |
|
|
Mid Layer 1, etc. Power Plane 1, etc. Mechanical layer 1, etc. Drill Drawing, Top to Mid 1, Mid2 to Mid 3, etc. Drill Guide, Top to Mid 1, Mid2 to Mid 3, etc. |
|
.G1, G2, etc. .GP1, GP2, etc. .GM1, GM2, etc. .GD1, GD2, GD3, etc. .GG1, GG2, GG3, etc. |
Yes. We can use your DFX or DWG file generated by AutoCAD to make boards. We transfer the AutoCAD file to Gerber files to make your boards. A PDF file shown correct board layout and generated by the customer is required. We will be responsible if the Gerber files generated by us from the AutoCAD file are wrong compared to the PDF file. However, we will not be responsible if the PDF file is wrong.
We check your artwork based on Gerber files or AutoCAD files. We do provide some suggestions to you, free of charge if you need, on our design rules such as increasing clearance, trace width or pad size to decrease cost or make your ordered boards within our manufacturing capability. But it is still up to you to make decision.
Please email your files to: sales@sunreytech.com.
The set-up charge is used for our preparation of tooling and photo process. The test charge is used for our preparation
of test fixtures and test program for test of your board. The Set-up & Test NRE charge is nonrecurring.
It means you will not need to pay the NRE charge for repeat orders of the same PCB layout files.
For this information, please check our site at Production Capability.
Please go to our online PCB quote at http://www.sunreytech.com/index.php?route=product/product&product_id=50 or http://www.sunreytech.com/index.php?route=product/product&product_id=62 and fill out the form and click the button “Quotation” and it’s done. All of the items marked with “*” are necessary information we need for your quote. The more accurate the information you give us through the quote form, the quicker and more reliable you will get the quote. For the technical terms you may have trouble to understand, please click the underlined terms for explanation.
You will receive the quote instantly both via online and from your email address.
The Lead Time is the duration between the time you order and the time the boards are expected to ship. This time frame is for manufacturing time only and is calculated in business days. The lead time does not include the day the order is placed, the day it ships, weekends or holidays.
We accept Credit Card (Visa, MasterCard, American Express) using PayPal service. We also accept payment via direct bank transfer.
We hold up production of your boards for your instruction or revision if there are any problems in your board layout files. It may come from mistakes from your board files or some possible problems in your board design. You should check your board files very carefully to avoid hold-up. The hold-up may delay shipping of your ordered product! It takes about
one ~ two days to resume production after one hold-up period.